08 Toyota Tundra Headlight Adjustment

Back of the headlight should have 2 adjustment screws.

08 toyota tundra headlight adjustment. If you look behind you headlight you should see a vertical slot leading to something that looks like a gear. Not really on subject but I wonder what it would take to add auto adjust headlights to my 08 CM Limited. Turn it counter-clockwise to make the light go up and clockwise to adjust down.

You should be able to reach in there with a long. Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly. 2 Apr 8 2016 Edited Remove the black cap towards the top of the headlight.

With the high beams on the high intensity zone should be vertically centered with the exact center just below the horizontal line. Perform lo beam aim adjustment. The one circled in red should be your up and down adjustment for the projector.

Adjustment is made by turning the top adjusting screw clockwise to raise the beam and counterclockwise to lower the beam. You adjust each headlight individually. Use the 8mm socket wrench to adjust the horizontal alignment screws on both headlights measuring the vertical lines on the wall as needed until the distance between the lines on the wall is equal to the distance between the lines on the lenses.

2 Oct 3 2015. I think the top is the horizontal and the bottom is the vertical adjustment. Adjust the vertical headlight aim into the specified range by turning aiming screw A with a screwdriver.

2010 tundra auto adjust headlights with projector retrofit. Ok I just bought a 2008 Toyota Tundra 4x2 not the MAX just the regular Tundra but the new 08 one from a private owner a total awsome truck. The headlight aim moves down when turning the aiming screw clockwise and moves up when turning the aiming screw counterclockwise.