2000 Toyota Tundra Lower Ball Joint Bolts

Remove nut bolts and compression lower arm assembly.

2000 toyota tundra lower ball joint bolts. Upper control arm ball joint. Discussion in 1st Gen Tundras 2000-2006 started by simonmiles Feb 25 2019. I used a pitman arm puller to remove the tie rod from the ball joint.

Press the stub shaft out of the hub. 89 ft lbs Top stabilizer bolt. 2000-2003 Toyota Tundra Joint Assembly Lower Ball Front Left.

Chock wheels engage ebrake jack front end of truck up. Loosen lateral lower arm ball joint and knuckle nut. NOTE Use new circlips split pins and self-locking nuts for assembly.

221 ft lbs Lower ball joint. A ball joint consists of three pieces. The ball and socket allows your suspension to move at different angles for steering and going over rough spots or bumps.

This video is only for 1st gen Tacoma 1st gen Tundra and 3rd gen 4Runner only. Choose for Me to. A ball with a threaded stud a socket and a rubber boot.

I had this happen to the 89 I had where the threads stripped out of the knuckle upon installing a new ball joint. IIRC its M12x15 Easy way to check is take the other bolt thats presumably good to advance auto. Using steering linkage puller separate ball joint and knuckle.