2001 Toyota Tundra Rear Bumper Removal

The tongue capacity of 500 lbs is the weight of the hitchball can take from gravity so you can drop 500 lbs onto the.

2001 toyota tundra rear bumper removal. Seems pretty extensive scrub bumper with mild soap rinse with DI water dry degrease sand bumper clean again with soap and rinse with DI water degrease with anti-static plastic cleaner apply plastic parts adhesion promoter apply plastic parts primer. All the same-as-original bumpers from K-Metal are a perfect option to go if you want to restore and maintain the original look of. Same quality as OE for less Direct replacement.

Remove the bumper arm-to-body bolts from each side of the bumper. The hardest part of removing the bumper is getting under the truck and popping the small plastic tabs that hold the black top cover on. New 2020 2021 complied Toyota Tundra Platinum powered by a 381hp 57ltr V8 coupled with the 6 speed automatic.

-remove the cover of the bumper underneath and Unscrew two screws on each side twisted upside down-around the bottom part Unscrew the screws spun up-assistant exempt corners of the latches in the wings and remove the bumper from the guides themselves-remove the connector from the fog lamp if any-remove connector from the PDC if any. RockAuto ships auto parts and body parts from over 300 manufacturers to customers doors worldwide all at warehouse prices. The center portion has the same plastic tabs and two plastic hooks youll have to bend in a little behind the license plate.

There is a screw on each side of the bumper cover at the wheel wells. Toyota Tundra without Park Assist Sensors with Standard Bed 2001 Rear Step Bumper Assembly by K-Metal. If you wish to remove the entire set up from the frame remove the bolts attaching the brackets to the frame rails.

Remove black clips under tail lamps flat head screwdriver to pull center of the clip up slowly then remove the hole clip. I saw a youtube video where this kid replaced his tundras bumper but only the cosmetic part of the bumper the outer shell so no the part that goes to the frame. Generation 1 Toyota Tundra rear bumper step pad.

So is it pretty easy to do. Toyota Solara -Under the hood unscrew the screws and pull out the pistons screwed and inserted from top to bottom that secure the upper part of the bumper and the radiator grill. The 2UZ-FE engine can pull around 7200 lbs but the hitch and bumper can only do the 5000 lbs unless you get a Class 4 hitch.